Filter
Top Products
30
Wednesday is 3, etc.). For example, if in
step 2 you displayed Wednesday’s pro-
gram, when you press
HOLD
COPY
, COPY 3 will
appear in the display (as shown below).
EXAMPLE:
4. Press
ADV
DAY
to select the day you want to
copy the program TO.
5. Press
HOLD
COPY
. COPY will disappear from the
display, and the display will show the copied
heating/cooling time and temperature for
the day you copied TO.
6. Repeat the above steps to copy any day’s
programming into any other day’s program.
7. Press
RUN
PRGM
to begin program operation.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat
programming one final time before beginning
thermostat operation.
1. Press
SYSTEM
HEAT - OFF - COOL - AUTO
until HEAT is displayed.
2. Press and hold
VIEW
PRGM
to view the heating
times and temperatures for Monday.
3. Press
ADV
DAY
once to advance to Tuesday.
4. Press and hold
VIEW
PRGM
to view heating times
and temperatures for Tuesday.
5. Repeat steps 3 and 4 to review all remaining
days’ programming. If you find an error in
any day’s programming, go back to the