Filter
Top Products
26
VIEW
PRGM
until you are at the point where you
stopped programming. Then you may continue
to enter your programs normally. If you want to
stop programming at any time, simply press
RUN
PRGM
to resume program operation.
1. Press
SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press
VIEW
PRGM
once. 5 DAY (indicating week-
day program), and MOR, representing the
morning heating period, will appear in the
display. Also displayed are the currently
programmed start time for the MOR period
and the currently programmed tempera-
ture.
EXAMPLE:
5 DAY
This display window shows that for the
weekday MOR period, the start time is 5:00
AM, and 70° is the programmed tempera-
ture (this example reflects factory prepro-
gramming).
3. To change the displayed start time to your
selected start time for weekday MOR heat
program, press
TIME
FWD
or
TIME
BACK
until your
selected time appears. The time will change
in 15 minute increments.
4. Press or until you reach your
selected weekday MOR heating tempera-
ture.
5. If you want the fan to run continuously
during this period, press
FAN
ON – AUTO
until PRG
FAN is displayed.