Filter
Top Products
17
be replaced. The word BATTERY will be
displayed continuously (non-flashing) when
24v AC power is not being supplied to the
thermostat and the thermostat is operating
on battery power only.
• AUDIO PROMPTING — Each time you
press a button, the thermostat will beep.
• BACKLIT DISPLAY — When you press
any button on the thermostat, the display is
lit for approximately eight seconds.
• SYSTEM INDICATOR LIGHT — The red
light on the upper right part of the thermostat
indicates system operation (see PARTS OF
THE THERMOSTAT).
• COMPRESSOR SHORT CYCLE PROTEC-
TION — To protect your compressor from
potential damage due to rapid cycling, this
thermostat has a built-in delay of 5 minutes
between cooling cycles. The following may
cause a time delay in COOL:
a) Return of power after a power outage.
b) Pressing
SYSTEM
HEAT-OFF-COOL-AUTO
to change operating
modes.
c) Pressing , creating a call for COOL
too soon after a previous call.
• TOTAL KEYPAD LOCKOUT — When
Group A option switch #1 is in the total
keypad lockout position (ON), programs
cannot be altered and all buttons are dis-
abled.
Programming should be completed and batter-
ies should be installed before changing Group
A option switches #1 or #2.
NOTE