Filter
Top Products
27
programming at this point, press
RUN
PRGM
to start
the normal program function. See PRO-
GRAMMING YOUR THERMOSTAT.
4. What happens if the electricity goes off
or is manually shut off?
If you have not installed 3 “AA” alkaline
batteries, the display will go blank and the
program will be lost in approximately one
minute. When electricity is restored, the
clock will reset itself to 12:00 PM (noon) and
the thermostat will maintain a heating tem-
perature of 64°F and a cooling temperature
of 82°F until you reenter your program.
Setpoint temperature will not be displayed.
If fresh “AA” Energizer
®
alkaline batteries
are installed, the program will be main-
tained for about one year with no 24 VAC
power present to the thermostat. See OP-
ERATING YOUR THERMOSTAT.
5. What can cause the thermostat display
to freeze or go blank?
A completely blank display may indicate
that power has been lost to the thermostat
and the backup battery is also dead. How-
ever, if there is power to the thermostat and
the display is blank or frozen, static dis-
charge is probably the cause.
During periods of low humidity (especially
during cold weather), you may feel or see a
spark discharge when you touch the ther-
mostat. This may cause the program to be
lost or the thermostat to display incorrectly.
To correct this, remove the thermostat from
the wall and disconnect the battery. Wait
about one minute, then reconnect the bat-