Filter
Top Products
18
choose start times, heating temperatures, and
cooling temperatures independently for both
weekday and weekend programs (for example,
you may select 5:00 AM and 70° as the weekday
MOR heating start time and temperature, and
choose 7:00 AM and 76° as the weekday MOR
cooling start time and temperature).
Use the following table to plan your program
time periods, and the temperatures you want
during each period. You may also want to look at
the sample program table to get an idea of how
the thermostat can be programmed.
Now look at the factory preprogrammed times
and temperatures shown below. If this program
will suit your needs, simply press
RUN
PRGM
to begin
running the factory preset program.
If you want to change the preprogrammed times
and temperatures, do the following.
Determine the time periods and heating and
cooling temperatures for your weekday pro-
gram. You must program 4 periods for each day
(MOR, DAY, EVE, and NHT). However, you
may use the same heating and cooling tempera-
tures for consecutive time periods. You can
Heating Program for ALL days of the Week:
FACTORY PREPROGRAMMING
Cooling Program for ALL Days of the Week:
PERIOD TIME TEMP PERIOD TIME
TEMP
MOR
DAY
EVE
NHT
5:00 AM
9:00 AM
4:00 PM
10:00 PM
70
70
70
64
MOR
DAY
EVE
NHT
5:00 AM
9:00 AM
4:00 PM
10:00 PM
78
82
78
78