Filter
Top Products
22
5. Press
SET
DAY
once. The display will show the
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the current day of the week.
7. Press
RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Enter Heating Program
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume pro-
gramming after this happens, press
VIEW
PRGM
until
you are at the point where you stopped program-
ming. Then you may continue to enter your
programs normally. If you want to stop program-
ming at any time, simply press
RUN
PRGM
to resume
program operation.
1. Press
SYSTEM
SWITCH
until HEAT is displayed.
2. Press
VIEW
PRGM
once. 5 DAY (indicating weekday
program), and MOR, representing the morn-
ing heating period, will appear in the dis-
play. Also displayed are the currently pro-
grammed start time for the MOR period and
the currently programmed temperature.
EXAMPLE:
5 DAY
This display window shows that for the
weekday MOR period, the start time is 5:00