Filter
Top Products
23
7. Repeat steps 3 through 5 to select the start
time and heating temperature for the week-
day DAY program.
8. Repeat steps 3 through 7 for the weekday
EVE and NHT heating programs.
9. After entering your weekday heating pro-
gram, repeat steps 1 through 8 for your
weekend programming (keep in mind that
for weekend programming, the display
should be changed from 5 DAY to 2 DAY).
10. When you have completed entering your
heating program, press
RUN
PRGM
.
AM, and 70° is the programmed tempera-
ture (this example reflects factory prepro-
gramming).
3. To change the displayed start time to your
selected start time for weekday MOR heat
program, press
TIME
FWD
or
TIME
BACK
until your se-
lected time appears. The time will change in
15 minute increments.
4. Press or until you reach your
selected weekday MOR heating temperature.
5. If you want the fan to run continuously
during this period, press
FAN
SWITCH
until PRG
FAN is displayed.
6. Press
VIEW
PRGM
. The currently programmed start
time and heating temperature for weekday
DAY will be displayed.