Filter
Top Products
19
Program the Water Softener -- Model WHES30
UP button
DOWN Button
PROGRAM button
RECHARGE button
Display
PRESSTO SCHEDULE
HOLDTO ST ART
+
−
PROGRAM
RECHARGE
SET
SAL T
LEVEL
CHECK
SAL T
LEVEL
SETSALTLEVELbutton
Figure 11
If you have questions about installation, progr amming, oper ating and routine maintenance...
call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electrical outlet, a mode l code and a test number ( example:
s3.0),begin toflashin the faceplate display. Then, 12:00PM and the words “CURRENT TIME” begin
to flash.
NOTE:
If -- -- -- -- shows in the display, press the UP
+
or DOW N
−
button u ntil LE31
shows in the display. Then, press the
PROGRAM button to set, and change to the
flashing CURRENT TIME display.
Set Time of Day
If the words “CURRENT TIME” do not show in the display, press the PROGRAM button until
they do.
1. Press the
+
Up or
−
Down buttons to setthe pre sent time. Up moves the display ahead; down
sets the time back.
Be sure AM or PM is correct.
NOTE:
Press buttons and quic kly release to slowly advance the display. Hold for fast
advance. This procedur e applies for all following settings.