Filter
Top Products
Setting the clock on the remote control
It is not necessary to set the clock on the remote
control to operate the air conditioner. However, it
is important to set the correct time of day if you
want to use the AUTO START and AUTO STOP
functions. This clock activates the AUTO START
and AUTO STOP functions, and it resets the air
conditioner’s internal clock every time a new
transmission is made.
To ret the clock
1. Press the CLOCK SET pad.
2. Press the TIME A (up) or V (down) pads
until the correct time of day appears in the
display.
Be sure the time is set correctly for
AM or PM.
For a 24-hour time display, press the
TIME V pad. While holding in the TIME V
pad, press the TIME A pad. “24H” will show
next to the set time.
NOTE:
For faster time movement, hold in the
A
or V pad.
3. Press the CLOCK SET pad again to save
your time of day setting.
You should hear a
confirmation beep from the air conditioner.
This example shows a set time of day of
12:OO PM (noon).
NOTE:
The clock runs continuously-whether the
remote control is on or off. After removing or
replacing the batteries, the clock will have to be
reset.