Filter
Top Products
Cleaning the front panel
1. Unplug the power cord.
2. Remove two screws from bottom edge of front
panel. Remove the front panel from unit when
cleaning.
3. Lii the front panel up and toward you.
4. Remove slide-out air filter and clean sepa-
rately. (See “Cleaning the slide-out air filter”
below.)
NOTE: Front panel does not have to be
removed to clean fitter.
5. Clean front panel with warm water, mild soap
or detergent and a soft cloth.
6. Rinse front panel and dry thoroughly.
7. Wipe control panel clean with a soft, dry cloth.
8. Replace front panel and screws.
9. Plug in the power cord.
0
c
0
I
Screw
Screw
Cleaning the slide-out air filter
The air filter is cleanable. A clean air fitter helps
remove dust, lint and other particles from the air.
Check the air filter every two weeks to see if it
needs cleaning.
1. Remove air fifter by sliding it up and out the
top of the front panel.
2. Clean filter using a vacuum cleaner.
OR
If fiker is very dirty, wash it with warm water
and mild detergent. Air dry fiker thoroughly
before replacing.
3. Replace air fiker by sliding it back down into
the opening at top of the front panel.
14