Filter
Top Products
2. Select a fan speed by pressing the corres-
ponding pad.
The name of the pad you press
will appear in the display.
AUTO
HIGH
MED
LOW
For unit to select fan speed
required to reach selected
temperature setting
For maximum air movement
For normal air movement
For minimum air movement
NOTE:
When changing from one operating
mode to another, the remote control retains
the fan speed from the first mode until a
different fan speed is selected in the new
mode.
3.
For COOLI or FAN* modes:
Set the
temperature by pressing the TEMPA (up) or
V (down) pad(s) until the desired temperature
shows in the display.
To change the display from “F to “C (or
from “C to “F) press the TEMP V pad. While
holding in the TEMP V pad, press the
TEMP A pad.
The OFF pad
The OFF pad turns the remote control and the air
conditioner off. Pressing the OFF pad will not turn
off the AUTO START and AUTO STOP functions.
The transmit symbol
This symbol shows you that your selection has
been transmitted to the air conditioner. You will
also hear a confirmation beep from the unit.
7