Filter
Top Products
7. Remove the 2 screws from the outer edges
P
of the top of the cabinet. Use these and the
additional 3 screws supplied to attach the top
trim frame.
P
6. Use 6 of the screws supplied to attach the left
and right vertical trim frames to the existing
holes in the cabinet.
al
9. Slide the air conditioner fully into the sleeve.
Center the air conditioner in the sleeve so
that all seals bear evenly to prevent leakage.
10. Use the 2 screws supplied to attach the
bottom trim frame to the existing holes in the
vertical trim frame.
I
L
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
11. Before inserting the plug into the power
supply, make sure the Fan Control is OFF.