Filter
Top Products
The exhaust vent control
The Exhaust Vent draws stale or smoky air from
the room, or circulates existing room air.
To exhaust room air
1.
2.
3.
Set the Exhaust Vent Control to OPEN.
Set the Fan Control to the desired setting.
If no cooling is desired, set the Fan Control
to LOW or HIGH FAN.
Set the Thermostat Control to the desired
setting.
To circulate room air
1. Set the Exhaust Vent Control to CLOSED.
2. Set the Fan Control to the desired setting.
If no cooling is desired, set the Fan Control
to LOW or HIGH FAN.
3. Set the Thermostat Control to the desired
setting.
NOTE: For maximum performance, the Exhaust
Vent Control must be in the CLOSED position
when cooling or room air circulation is desired.
Changing air direction
The air direction louvers, in the top grille area of
the front panel, control the direction of the cooled
air. Move the tabs in the center area of the
louvers to adjust airflow left, right, or straight
ahead. Move the thumb wheel between the
louvers to direct airflow up or down.
11