Filter
Top Products
Operating Instructions
Flre Hazard
Do not use an extenslon cord.
Dolng so can result In death, fire, or
electrical shock.
Starting your air conditioner
Electrical Shock Hazard
Plug Into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding clrcult.
Do not use alr condltloner wlth front
panel removed.
Failure to follow these lnstructlons can
result In death, electrlcal shock, or
serious Injury.
1. Set Exhaust Control to CLOSED for maxi-
mum cooling results.
2. Set Fan Control to the desired setting.
LOW COOL
. . . . . . . . . . . . . . . . . . . . . . . . . . for sleeping comfort
HIGH COOL
. . . . . . . . . . . . . . . . . . . . . . . . for maximum cooling
LOW and HIGH FAN . . . . . . . . for circulating room air
when no cooling is desired
3. Turn the Thermostat Control to the desired
setting. You can adjust the air conditioner’s
cooling performance by turning the Thermo-
stat Control clockwise for more cooling or
counterclockwise for less cooling. You will
need to experiment to find the setting which
suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before turning
it back on or you may blow a fuse or trip a circuit
breaker.
10