Filter
Top Products
7
■ If the window opening is too narrow for the window slider
kit, remove the inner slider section from the window slider
kit.
■ Using a saw, cut the inner slider section to fit the window
opening.
■ Slide the inner slider section into the outer slider section
of the window slider kit.
6. Place the window slider kit into the window, extending it to fit
the width of the window. Be sure the rain cover is on the
outside of the window.
NOTE: For casement window installation, the window slider
kit may be installed vertically with the window slider kit
opening at the bottom.
7. Insert ¹⁄₂" screw (provided) into the hole in the inner slider
section that is closest to the end of the outer slider section of
the window slider kit.
8. Close the window onto the window slider kit to secure.
Complete Installation
1. Place the window-lock bracket on top of the lower window
and against the upper window sash.
2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
bracket.
3. Attach the window-lock bracket to the window sash with ³⁄₄"
screw to secure the window in place.
A.Inner slider section
B.Outer slider section
A
B
A.
¹⁄₂
" screw (provided)
B.Inner slider section
C.Outer slider section
A.To portable air conditioner
B.Outdoors
C.Rain cover
D.Window slider kit
E.Window exhaust adapter
F. Flexible exhaust hose
A.Upper window sash
B.Window-lock bracket
A
B
C
D
AB
C
E
F
A
B