Filter
Top Products
10
■ To change the temperature display from ºF to ºC, press both
the up and down Adjust buttons at the same time.
Clock
1. To set or adjust the clock, press TIMER ON and TIMER OFF
at the same time.
2. Press the up or down Adjust button to set the time of day.
Press the Adjust button once for the time to change in
1-minute increments. Press and hold the Adjust button for
several seconds for the time to change in 10-minute
increments. Press and hold the Adjust button longer for the
time to change in 1-hour increments.
3. Press TIMER ON and TIMER OFF at the same time again. The
time of day will show on the display.
NOTE: Time of day will display in 24-hour format (military time)
only.
Timer Delay
To set the Timer for a 1-minute to 24-hour delay until the
air conditioner turns off (the air conditioner must be On):
1. Press TIMER OFF. “OFF: 12:00” will flash on the control panel
display.
2. Press the up or down Adjust button to change the delay time
from 1 minute to 24 hours. Press the Adjust button once for
the time to change in 1-minute increments. Press and hold
the Adjust button for several seconds for the time to change
in 10-minute increments. Press and hold the Adjust button
longer for the time to change in 1-hour increments.
3. Press TIMER OFF again. Timer “Off” indicator light and the
set time will remain on.
4. After 5 seconds, the control panel display will show the
current time.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER ON. “ON 12:00” will flash on the control panel
display.
3. Press the up or down Adjust button to change the delay time
from 1 minute to 24 hours. Press the Adjust button once for
the time to change in 1-minute increments. Press and hold
the Adjust button for several seconds for the time to change
in 10-minute increments. Press and hold the Adjust button
longer for the time to change in 1-hour increments.
4. Press TIMER ON again. Timer “ON” indicator light and the set
time will remain on.
5. After 5 seconds, the control panel display will show the
current time.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn off the air conditioner.
2. Adjust mode to Cooling, Dry or Fan Only.
3. Adjust fan speed to Auto, High, Mid or Low.
NOTE: Auto fan speed cannot be selected in Fan Only mode.
4. Adjust temperature between 64ºF and 90ºF (18ºC and 32ºC).
NOTE: In Fan Only and Dry modes, the temperature cannot
be adjusted.
5. Press TIMER ON. “ON 12:00” will flash on the control panel
display.
6. Press the up or down Adjust button to change the delay time
from 1 minute to 24 hours. Press the Adjust button once for
the time to change in 1-minute increments. Press and hold
the Adjust button for several seconds for the time to change
in 10-minute increments. Press and hold the Adjust button
longer for the time to change in 1-hour increments.
7. Press TIMER ON again. Timer “ON” indicator light and the set
time will remain on.
8. After 5 seconds, the control panel display will show the
current time.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER OFF again to clear Timer Off feature. Timer
indicator light will turn off.
2. Press TIMER ON again to clear Timer On feature. Timer
indicator light will turn off.
Using the Remote Control
NOTE: Remote control may vary in appearance.
Adjust
Timer
Off
Timer
On