Whirlpool 1328891 Air Conditioner User Manual


 
13
PORTABLE AIR CONDITIONER CARE
Draining the Air Conditioner
1. Press ON/OFF to turn off the air conditioner.
2. Unplug the air conditioner or disconnect power.
3. Move the air conditioner to a drain location or outside.
NOTE: To avoid spilling water from the bucket, move the air
conditioner slowly and keep it level.
4. Remove the secondary drain plug and drain water
completely.
5. Remove the primary drain hose from the drain hose clip.
6. Remove the drain hose plug from the end of the primary drain
hose and drain water completely.
NOTE: If the air conditioner will be stored after use, see
“Storing After Use.”
7. Reinstall the secondary drain plug.
8. Reinstall the drain hose plug to the primary drain hose.
9. Reattach the primary drain hose to the drain hose clip.
10. Reposition the air conditioner.
11. Plug in the air conditioner or reconnect power.
12. Press ON/OFF to start the air conditioner.
Cleaning the Air Filter
1. Press ON/OFF to turn off the air conditioner.
2. Open the filter panel door on the back of the air conditioner
and remove.
3. Remove the air filter from the filter panel door.
4. Use a vacuum cleaner to clean the filter. If the filter is very
dirty, wash the filter in warm water with a mild detergent.
NOTE: Do not wash the filter in the dishwasher or use any
chemical cleaners.
5. Air dry the filter completely before replacing to ensure
maximum efficiency.
6. Reattach the air filter to the filter panel door.
7. Reinstall the filter panel door.
8. Press ON/OFF to start the air conditioner.
Cleaning the Outside
1. Press ON/OFF to turn off the air conditioner.
2. Unplug the air conditioner or disconnect power.
3. Remove the air filter and clean separately. See “Cleaning the
Air Filter.”
4. Wipe the outside of the air conditioner with a soft, damp
cloth.
5. Plug in the air conditioner or reconnect power.
6. Press ON/OFF to start the air conditioner.
Storing After Use
1. Drain the water completely. See “Draining the Air
Conditioner.”
2. Run the air conditioner set to Fan Only for approximately
12 hours to dry the air conditioner.
3. Unplug the air conditioner.
4. Remove the flexible exhaust hose and store with the air
conditioner in a clean, dry area. See “Installation
Instructions.”
5. Remove the window kit and store with the air conditioner in a
clean, dry area. See “Installation Instructions.”
6. Remove the filter and clean. See “Cleaning the Air Filter.”
7. Clean the outside of the air conditioner. See “Cleaning the
Outside.”
8. Reinstall the filter.
9. Remove the batteries and store the remote control with the
air conditioner in a clean, dry area.
A.Secondary drain plug
B.Drain hose plug
C.Drain hose clip
D.Primary drain hose
A
B
C
D
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A.Filter panel door
B.Air filter
A
B