Filter
Top Products
3
2
1
Windload Label Locations
Attaching the Installation Decals
After the installation is complete, locate in a obviously visible location on the inside of the garage door and the
post(s) and place the provided installation labels and tag(s) onto the door and post(s) for future reference.
IMPORTANT! LABELS AND TAG(S) MUST BE ATTACHED TO BOTH DOOR AND POST(S).
8
MAKE SURE LABELS AND TAG(S) LIKE THE ONES ABOVE ARE INSTALLED ON THE DOOR
AND POST(S)!
CONTACT WAYNE-DALTON CORP. FOR A FREE REPLACEMENT DECAL.
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To fi nd your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
1 Applied by Installer - One (1) Emergency High Wind Situations Tags
(161384) per post -Tags are to be applied to post(s) when stored on
wall for constant reminder to consumer.
2
3
Applied by Installer - One (1) Windload Post Installation Instructions
Label (307177) -Only on doors specifi ed with one or more posts. To be
applied to inside of door, next to endcap of second section on side of the
door where Post no. 1 is stored.
Applied by Installer - One (1) Windload PSF Label per post, based
on the required design PSF load. Label is to be applied to windload
post for reference.