Filter
Top Products
2
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,
refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
A. TRACK ROLLERS (AS REQUIRED):
A1. Short Stem Track Rollers
A2. Long Stem Track Rollers
A3. Short Stem Tandem Track Rollers
A4. Long Stem Tandem Track Rollers
B. GRADUATED END HINGES:
B1. Single Graduated End Hinges (S.E.H.), Industry Standard
B2. Double Graduated End Hinges (D.E.H.), Industry Standard
B3. Half Center Hinges (As Required)
C. STACKED SECTIONS:
C1. Top Section
C2. Intermediate(s) Section (As Required)
C3. Bottom Section
D. TOP FIXTURES (AS REQUIRED):
D1. Top Fixture Assemblies
E. STRUT(S) (AS REQUIRED):
E1. Strut (2” U-shaped)
E2. Strut (3” U-shaped)
F. TRACKS:
F1. Left Hand and Right Hand Horizontal Track Assemblies
F2. Left Hand and Right Hand Riveted Track Assemblies (As Required)
F3. Left Hand and Right Hand Wall Angle Track Assemblies (As Required)
F4. Left Hand and Right Hand Vertical Track Assemblies (As Required)
F5. Left Hand and Right Hand Vertical Tracks (As Required)
F6. Left Hand and Right Hand Fully Adjustable (F.A.) Flag Angles (As Required)
F7. Left Hand and Right Hand Fully Adjustable (F.A.) Jamb Brackets (As Required)
G. EXTENSION SPRING ASSEMBLY:
G1. Extension Springs
G2. Snubber Cables
G3. Front Cable Lift Sheaves
G4. Rear Cable Lift Sheaves
G5. 3 Hole Clips (As Required)
G6. S-Hooks (As Required)
G7. Sheave Forks (As Required)
G8. 5/16”–18 x 3-3/4” Eye Bolts (As Required)
G9. Counterbalance Lift Cables
G10. 5/16”–18 Hex Nuts (As Required)
H. REAR BACK HANGS:
H1. Left Hand Rear Back Hang Assemblies
H2. Right Hand Rear Back Hang Assemblies
I. BOTTOM CORNER BRACKET (AS REQUIRED):
I1. Left Hand and Right Hand Bottom Corner Brackets
J. TRACK ROLLER CARRIERS (AS REQUIRED):
J1. Track Roller Carriers
K. BOTTOM WEATHER SEAL (AS REQUIRED):
K1. Bottom Weather Seal (Door Width)
A3.
A1.
A2.
A2.
A1.
B1.
B2.
C3.
C1.
C2.
C2.
E1.
F1.
F1.
F2.
H2.
H1.
B3.
NOTE: The illustrations shown on this page are general
representations of the door parts. Each specific door
models may have unique variations.
E2.
D1.
F3.
F3.
K1.
J1.
I1.
J1.
I2.
A4.
A2.
A1.
D1.
F7.
F6.
F6.
F7.
F5.
F5.
F4.
F4.
G3.
G6.
G5.
G4.
G7.
G1.
G8.
G10.
G5.
G10.
G9.
G2.
G5.
G5.
G10.
G10.
G8.
G7.
G1.
G9.
G2.
G3.
G6.
G5.
G4.
F2.
PARTS BREAKDOWN