Vivotek FD8167-(T) Home Security System User Manual


 
VIVOTEK
User's Manual - 121
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the dened threshold.
If you want to congure other motion detection settings for day/night/schedule mode, please click Prole
to open the Motion Detection Profile Settings page as shown below� A total of three motion detection
windows can be congured on this page as well.
Please follow the steps beolw to set up a prole:
1� Create a new motion detection window�
2� Check Enable this prole
3. Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time
range if you choose Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event Settings page� You can go to Event
> Event settings > Trigger to choose it as a trigger source� Please refer to page 130 for detailed
information�
Percentage = 30%
Video(TCP-AV)
2010/12/10 17:08:56