Filter
Top Products
Model 5100-02-IT Combustible Gas Sensor Module
Page: 16
4.2 MAIN MENU
Table 4-1 describes the primary human-machine interface operation.
Function Display Description Reference
M E
ST
M E
ST
ME
S T
ME
S T
M E
ST
M E
ST
M E
ST
M E
ST
M E
ST
M E
ST
M E
ST
Key
Mode Switch [M]
Enter Switch [E]
Up Switch [▲] Previous Menu
Down Switch [▼] Next Menu
5100-02 First screen at power up-model
1.Xxa VX.Xxx Second screen at power up-version
Warm.XXX Third screen at start up-warm up
0%LEL Normal condition - default display
Mode ALMRSET: Mode Function -Alarms Acknowledge
SSSSSSSS
Banner: Use <M> switch for different menu items. Select <E> to
enter menu item.
0%LEL Default Display
Mode ALMRSET: Mode Function - Alarms Reset
Mode CALIB: Mode Function - Calibrate Table 5-1
Mode SETUP: Mode Function - Set Point Adjustments Table 4-3
Mode MAINT: Mode Function - Maintenance Table 4-4
Mode EXIT-? Exit Mode
Enter 0%LEL Apply Selected Mode (Exit)
Table 4-1
Master Menu
0%LEL Default Display
Table 4-2 describes the operational display values of the human-machine interface system.
ID THE DISPLAY SHOWS “START” INSTEAD OF “STARTING, THE MODULE MUST BE CALIBRATED BEFORE USING IT.
Display Description
STARTING Warm-up at start-up
##%LEL Concentration
L ##%LEL Low Alarm
H ##%LEL High Alarm
HIGH >100% Full Scale
NO SENSR Sensor Failure
C ##%LEL Calibration Mode
ACK Acknowledged Function
Table 4-2
Operation Display Values