Universal Electronics 975 Thermostat User Manual


 
27
Programming
and the settings for time and
temperature.
9. If you program Monday the first
time you press PROGRAM
VIEW
it will be copied to the rest of the
week. To program the other days of
the week press
ADV.
/DAY to until
you reach the day you wish to
change and follow Steps 10, 11 &
12. You can also copy the program
from one day to another. To copy,
press
HOLD
/COPY. The display will
show COPY, and all the other days
of week will be flashing. Press
HOLD
/COPY again to copy the day
in to the rest of the week or press
TIME
FWD
or TIME
BACK
until
you reach the day you want to copy
to and press
HOLD
/COPY.
10.Press TIME
FWD
or TIME
BACK
to set the time on the display
as selected in your HEATING or
COOLING Schedule. Be sure to
check the AM or PM on the display.
11.Press the red
or blue
button to adjust the tempera-
ture to match your schedule. If you
want the fan ON continuously
during this period, press
FAN
.
12.Press PROGRAM
VIEW
one
time. MOR on the display will
change to DAY. Repeat steps 10
and 11 to enter time and temperature
for this period.
13.Press PROGRAM
VIEW
to
continue through the entire
schedule, entering time and
temperature for each period. When
you are satisfied that your program
matches your schedule, press
PROGRAM
RUN
. Programming
is now complete for this mode and
your program is running.
14.To program the other mode,
repeat the procedure from step 6.