Filter
Top Products
23
The configuration menus allow you
to set certain thermostat operating
characteristics to your system or
personal requirements.
To enter the User Configuration menu,
press PROGRAM
RUN
to make sure
the thermostat is in the run program
mode, then press TIME
FWD
and
TIME
BACK
at the same time to enter
the configuration menu. The display will
show the first item in the configuration
menu.
You should contact a qualified service
person to change items that are
indicated “Recommend Installer
Setting”.
Operator may change shaded options if
desired. We recommend that other
options be set by the installer.
CONFIGURATION
Configuration
The following chart (pages 24 & 25)
describes each item on the menu and the
applicable model(s). Set these according
to your personal preference. To exit the
menu, press PROGRAM
RUN
. To
return to the menu at any time press
PROGRAM
RUN
, then press TIME
FWD
and TIME
BACK
at the same
time. While in the configuration menu,
if you do not press any buttons for two
minutes, the thermostat will revert to
normal operation.