Filter
Top Products
General information
RT-SVX20A-E42
Foreword
These instructions are given as a
guide to good practice in the
installation, start-up, operation, and
maintenance by the user, of Trane
TSD/TSH, WSKD/WSH and YSD/YSH
units. They do not contain full
service procedures necessary for
the continued successful operation
of this equipment. The services of a
qualified technician should be
employed through the medium of a
maintenance contract with a
reputable service company. Read
this manual thoroughly before unit
start-up.
TSD/TSH units are designed to
operate in cooling mode only, with
optional auxiliary heat (electric
heater or hot water coil).
WSD/WSH can operate in cooling
mode or heating mode by reversing
the refrigeration cycle with or
without auxiliary heat.
YSD/YSH units are designed to
operate In cooling mode and
equipped with a gas fired heating
module.
TSD/TSH, WSD/WSH and YSD/YSH
units are assembled, pressure
tested, dehydrated, charged and run
tested before shipment.
Warnings and cautions
Warnings and Cautions appear at
appropriate sections throughout
this manual. Your personal safety
and the proper operation of this
machine require that you follow
them carefully. The constructor
assumes no liability for installations
or servicing performed by
unqualified personnel.
WARNING! : Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION! : Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury. It may also be
used to alert against unsafe
practices or for equipment or
property-damage-only accidents.