Filter
Top Products
Toshiba XXXXXXX(X/X)
–16–
4-way Air Discharge Cassette Type
Owner’s Manual
EN
How to set up louver lock (No swing)
1 Push (right side of the button) for
at least four seconds when the air
conditioner is not working.
• , symbol, and numbers flash.
2 Select an indoor unit to be set by
pushing
(left side of the button).
• Each time you push the button, unit
numbers change as follows:
The fan of the selected unit runs and the
louvers start swinging.
3
Display the number of a louver you want to
lock on the temperature display section by
pushing TEMP. buttons.
• The selected louver starts swinging.
4 Select the wind direction of the louver
you do not want to swing by pushing
TIME
buttons.
CAUTION
• When (4) or (5) is selected, dew drop may occur
during cooling mode.
5 Determine the setting by pushing
button.
• When the setting has been determined,
lights up.
(To continue louver lock settings for other
indoor units, repeat from step 2. To
continue louver lock settings for other
louvers on the same indoor unit, repeat
from step 3.)
6 Push button to complete the setting.
• A louver number is displayed as F1, F2 on
the remote controller (Item Code), showing
that louver 01, 02 shown in the figure on the
previous page is selected.
NOTE
Even when louvers are locked, they move
temporarily in the following cases:
• While the air conditioner is stopping
• At the beginning of heating operation
• During defrosting operation
• When the room temperature reached the set
temperature
21
4
3
Unit No.
1-1
Unit No.
1-2
Unit No.
1-3
Unit No.
1-4
(1)
0001
(2)
0002
(3)
0003
(5)
0005
(4)
0004
CODE
0001-0005
(Louver lock position code)
16-EN
+00EH99930901-2_10L_4-way_OM.book Page 16 Friday, April 17, 2009 2:39 PM