Toshiba XXXXXXX(X/X)
–13–
4-way Air Discharge Cassette Type
Owner’s Manual
How to set louver wind
direction individually
1 Select an indoor unit to be set by
pushing
(left side of the button)
during operation.
• The indoor unit number changes each time
you push the button.
* When no unit number is displayed, all indoor
units are selected.
2 Select a louver you want to adjust
change by pushing
(right side of
the button).
• Each time you push the button, the display
on the left of the remote controller changes
as follows:
* When no louver number is displayed, all four
louvers are selected.
3 Determine wind direction of the selected
louver by pushing .
• Each time you push the button, the display
changes as follows:
* During COOL (DRY) mode, (4) and (5) are not
displayed.
3
1
2
Unit select button
Not
display
Unit No.
1-1
Unit No.
1-2
Unit No.
1-3
Unit No.
1-4
Not
display
Louver No.
04 02
03
01
Refrigerant
pipe
Drain
pipe
(1) (2) (3) (4)
(7) (6) (5)
13-EN
+00EH99930901-2_10L_4-way_OM.book Page 13 Friday, April 17, 2009 2:39 PM