Toshiba RAV-SM1400AT-E Air Conditioner User Manual


 
33
+3.0
Ta (˚C)
E
D
C
B
F
G
A
HH
(HH)
H (HH)
H (HH)
L(H)
L(H)
L(H)
L(L)
+2.0
+2.5
+1.5
+0.5
Tsc
-0.5
+1.0
No.
3
4
5
Item
Room
temperature
control
Automatic
capacity control
(GA control)
Air speed
selection
Outline of specifications
1) Adjustment range Remote controller setup tem-
perature (°C)
Wired type
COOL/
DRY
18 to 29
Heating
operation
18 to 29
Auto
operation
18 to 29
2) Using the item code 06, the setup temperature in
heating operation can be compensated.
Setup data
Setup temp.
compensation
0246
+0°C+2°C+4°C+6°C
Setting at shipment
Setup data 2
1) Based on the difference between Ta and Ts, the
operation frequency is instructed to the outdoor unit.
1) Operation with (HH), (H), (L), or [AUTO] mode is
performed by the command from the remote controller.
2) When the air speed mode [AUTO] is selected, the air
speed varies by the difference between Ta and Ts.
<COOL>
Controlling operation in case when thermo of remote
controller works is same as a case when thermo of
the body works.
If the air speed has been changed once, it is not
changed for 3 minutes. However when the air volume
is exchanged, the air speed changes.
When cooling operation has started, the air speed
selects a downward slope, that is, the high position.
If the temperature is just on the difference boundary,
the air speed does not change.
Mode in the parentheses indicates one in automatic
cooling operation.
Remarks
Shift of suction tempera-
ture in heating operation
HH > H > L > LL