–6–
SMMS-i
Installation Manual
EN
SMMS-i
Installation Manual
▼ Combination of outdoor units
Model name
(Standard type)
Cooperating outdoor unit
Unit 1 Unit 2 Unit 3
MMY-MAP0804* MMY-MAP0804* – –
MMY-MAP1004* MMY-MAP1004* – –
MMY-MAP1204* MMY-MAP1204* – –
MMY-MAP1404* MMY-MAP1404* – –
MMY-MAP1604* MMY-MAP1604* – –
MMY-AP1814* MMY-MAP1004* MMY-MAP0804* –
MMY-AP2014* MMY-MAP1004* MMY-MAP1004* –
MMY-AP2214* MMY-MAP1204* MMY-MAP1004* –
MMY-AP2414* MMY-MAP1204* MMY-MAP1204* –
MMY-AP2614* MMY-MAP1604* MMY-MAP1004* –
MMY-AP2814* MMY-MAP1604* MMY-MAP1204* –
MMY-AP3014* MMY-MAP1604* MMY-MAP1404* –
MMY-AP3214* MMY-MAP1604* MMY-MAP1604* –
MMY-AP3414* MMY-MAP1204* MMY-MAP1204* MMY-MAP1004*
MMY-AP3614* MMY-MAP1204* MMY-MAP1204* MMY-MAP1204*
MMY-AP3814* MMY-MAP1604* MMY-MAP1204* MMY-MAP1004*
MMY-AP4014* MMY-MAP1604* MMY-MAP1204* MMY-MAP1204*
MMY-AP4214* MMY-MAP1604* MMY-MAP1404* MMY-MAP1204*
MMY-AP4414* MMY-MAP1604* MMY-MAP1604* MMY-MAP1204*
MMY-AP4614* MMY-MAP1604* MMY-MAP1604* MMY-MAP1404*
MMY-AP4814* MMY-MAP1604* MMY-MAP1604* MMY-MAP1604*
Model name
(High Efficiency Model)
Cooperating outdoor unit
Unit 1 Unit 2 Unit 3
Unit 4
MMY-AP1624* MMY-MAP0804* MMY-MAP0804* – –
MMY-AP2424* MMY-MAP0804* MMY-MAP0804* MMY-MAP0804* –
MMY-AP2624* MMY-MAP1004* MMY-MAP0804* MMY-MAP0804* –
MMY-AP2824* MMY-MAP1004* MMY-MAP1004* MMY-MAP0804* –
MMY-AP3024* MMY-MAP1004* MMY-MAP1004* MMY-MAP1004* –
MMY-AP3224* MMY-MAP0804* MMY-MAP0804* MMY-MAP0804* MMY-MAP0804*
MMY-AP3424* MMY-MAP1004* MMY-MAP0804* MMY-MAP0804* MMY-MAP0804*
MMY-AP3624* MMY-MAP1004* MMY-MAP1004* MMY-MAP0804* MMY-MAP0804*
MMY-AP3824* MMY-MAP1004* MMY-MAP1004* MMY-MAP1004* MMY-MAP0804*
MMY-AP4024* MMY-MAP1004* MMY-MAP1004* MMY-MAP1004* MMY-MAP1004*
MMY-AP4224* MMY-MAP1204* MMY-MAP1004* MMY-MAP1004* MMY-MAP1004*
MMY-AP4424* MMY-MAP1204* MMY-MAP1204* MMY-MAP1004* MMY-MAP1004*
MMY-AP4624* MMY-MAP1204* MMY-MAP1204* MMY-MAP1204* MMY-MAP1004*
MMY-AP4824* MMY-MAP1204* MMY-MAP1204* MMY-MAP1204* MMY-MAP1204*
5 CARRYING IN THE OUTDOOR UNIT
CAUTION
Handle the outdoor unit carefully, observing the following items.
• When using a forklift or other machinery for loading/unloading in transportation, insert the prongs of the forklift
into the rectangular holes for handling as shown below.
• When lifting up the unit, insert a rope able to bear the unit’s weight into the rectangular holes for handling, and
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is caused
to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
Front /Back
GOOD NO GOOD NO GOOD
Plaster
Rope
Plaster
Rectangular
holes for
lifting
Reinforcing
plate
Prongs of the
forklift
Rectangular
holes for
handling
GOOD
NO GOOD
Side
11-EN 12-EN
+00EH99871699_01EN.book Page 6 Thursday, August 26, 2010 4:41 PM