Filter
Top Products
34
Power supply
12V DC㼳10%
Power consumption Approx. 10.3 W (Including a camera head, when the DC power supply is 12V)
Image-acquisition method RGB, 3CCD, Micro prism system
Image sensor
1/3 inch, IT䟿CCD
Output pixels
Horizontal : 1920, Vertical : 1080
Scanning system
2䠌1 interlace
Scan frequency
[59.94 Hz setting] Horizontal : 33.716 kHz, Vertical : 59.94 Hz
[60 Hz setting] Horizontal : 33.75 kHz, Vertical : 60 Hz
[59.94 Hz setting] Horizontal : 33.716 kHz
㼳35 ppm, Vertical : 59.94 Hz 㼳35 ppm
[60 Hz setting] Horizontal : 33.75 kHz
㼳35 ppm, Vertical : 60 Hz 㼳35 ppm
[59.94 Hz setting] Horizontal : 33.716 kHz
㼳35 ppm, Vertical : 59.94 Hz 㼳35 ppm
[60 Hz setting] Horizontal : 33.75 kHz
㼳35 ppm, Vertical : 60 Hz 㼳35 ppm
Sync system Internal/External (Automatic switching)
Horizontal resolution
800TV lines standard
Vertical resolution
800TV lines standard
Sensitivity
F6.8䟺2000 lx, 3000 K䟻
Minimum illumination
13 lx䟺F2.2, sensitivity䟽18 dB䟻
SN ratio 56 dB standard (gain 0 dB, DNR OFF)
Ambient temperature
(32㼲㼲F) to 400 F to 104䉔䉔
Ambient humidity
Less than 90% (non condensing)
Weight Approx. 730 g (1.61 lbs)
External dimension
(4.33”(W)㽙1.57”(H)㽙7.32”(D)) (excluding protrusions)
110(W)㽙40(H)㽙186(D) mm
Scene file(user memories)
5 files (A, B, C, D, E)
White balance
ATW䟺Automatic tracing white balance䟻, AWB䟺Automatic white balance䟻㻏
MANUAL
䟺Manual䟻
Gain
AUTO䟺Automatic gain control䟻, MANUAL䟺Manual䟻, OFF䟺0 dB䟻
Output signal
or RGB : 0.7 V (p-p) standard 75Y/P
B
/P
R
䂿 unbalanced, BNC connector
HD-SDI (SMPTE 292M) : 0.8 V (p-p) standard 75
䂿
unbalanced, BNC connector
Sync signal output
SYNC : 75
䂿
unbalanced BNC connector 0.6 V 0.1 V
Interface
Serial data interface䟺RS-232C䟻
Optional parts
IK-HD1H 䟺1/3 inch 3CCD camera head䟻
EXC䟿HD03 (Approx. 3 m (118”) Camera cable)
EXC䟿HD06 (Approx. 6 m (236”) Camera cable)
EXC䟿HD10 (Approx. 10 m (394”) Camera cable)
EXC䟿HD30 (Approx. 30 m (1181”) Camera cable)
Design and specifications are subject to change without notice.
* These conditions are only satisfied when the camera control unit is connected to camera head model # IK-HD1H.
External sync input
HD SYNC 0.6 V (p-p) 75
䂿
unbalanced BNC connector
9. SPECIFICATIONS
㼳