28
䟺
䟺䟺
䟺6䟻
䟻䟻
䟻 SYNC
When an external sync signal is input, the display changes from INT (internal sync) to EXT.(external sync)
automatically.
INT EXT
䟺
䟺䟺
䟺6䠀
䠀䠀
䠀1䟻
䟻䟻
䟻 INT screen
-- 6 SYNC -- <FILE A>
MODE INT
䟺
䟺䟺
䟺6䠀
䠀䠀
䠀2䟻
䟻䟻
䟻 Changing EXT. setting
Sync system display
-- 6 SYNC -- <FILE A>
H PHASE -1024 to 1023
MODE EXT
H PHASE 0
(a) Adjusting horizontal phase
䐖 Move the “䊲” to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Select the desired value of horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
䠭DATA UP䠯
䟿1024 0 1023
䠭DATA DOWN䠯
* If the phase difference is big, keep pressing [DATA UP]/[DATA DOWN] button for a while.
This will make the setting change by increments of ten.
Move up and down
by pushing
MENU UP,DOWN
Select the desired
value by pushing
DATA UP,DOWN