Filter
Top Products
19
(d) Changing the automatic shutter zone area
The available picture area is shown by the shading correction on the screen that is parted in 64.
䐖 Move the “䊲” to AREA by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Select the measurement light area by pushing [DATA UP], [DATA DOWN] buttons.
(e) Confirming the contents of the measurement light area selected by the automatic shutter
䐖 Set the “䊲” to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When changing the area,
refer to the item “7.2 (8) Setting USER area”.
䐘 Push the [DISP] button to return to the menu.
䠭DATA UP䠯
PRESET A PRESET B PRESET C PRESET D PRESET E USER
䠭DATA DOWN䠯
PRESET A PRESET B PRESET D PRESET C
PRESET E
USER
Custom
Selection