Filter
Top Products
23
䟺
䟺䟺
䟺3䠀
䠀䠀
䠀2䟻
䟻䟻
䟻 Changing the setting in ATW(Automatic Tracking White balance) mode
White balance mode AWB, ATW, MANUAL
-- 3 WHT BAL -- <FILE A>
R PAINT adjustment -10 to 10
MODE ATW
R PAINT 0
B PAINT adjustment -10 to 10
B PAINT 0
(a) Changing R PAINT
䐖 Move the “䊲” to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
䠭DATA UP䠯 Red is increased.
䟿10 0 10
Red is decreased. 䠭DATA DOWN䠯
The available picture area is shown by the shading correction on the screen that is divided into
64 parts.
PRESET A PRESET B PRESET D PRESET C
PRESET E
USER
Custom
Selection
Move up and down
by pushing
MENU UP,DOWN
Select the desired
value by pushing
DATA UP,DOWN
(e) Confirming the contents of the zone area selected by AWB
䐖 Set the “䊲” to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When changing the area,
refer to the item “7.2 (8) Setting USER area”.
䐘 Push the [DISP] button to return to the menu.