Filter
Top Products
NOTE: DIAGRAMS & ILLUSTRATION ARE NOT TO SCALE.
15
FIREBOX FINISHES
There are a wide variety of “fi nished looks” for your built-in Vent-Free fi rebox from formal wall
decor with elaborate mantels to rustic wood paneling or warm brick facings.
Only noncombustible materials like marble, stone, tile, brick, etc. may overlap the black front
facing. Seal all joints between the black facing and wall surrounds to prevent air intrusion. Use
noncombustible caulking material only to seal the black metal facing to the surround material on
the fi nished wall. See Figures 3 & 26.
Raised Hearth Extension
A hearth extension may be used but is not required for these appliances. A raised hearth extension
may be used as shown in Figure 26.
Raised Hearth Extension
(combustibles allowed.
No carpet or vinyl)
Combustible Platform
SIDE VIEW
Firebox Floor
Combustible Wall
Figure 26 - Raised Hearth Extension
Non-Combustible Wall
(see Figure 4)
Fireplace Opening
* From Base to
Bottom of Firebox
Opening (fl oor)
5-3/4" Max.*
Base
APPROVED ACCESSORIES AND
COMPONENTS
Decorative Volcanic Stone
The decorative volcanic stone, Model FDVS,
can be used to enhance the look of your ap-
pliance. Order model FDVS for replacement
of stone when needed. Spread the decorative
volcanic stone evenly around the bottom of
the fi rebox.
(ref. Form #750,010M)
Decorative Volcanic Stone
Cat. No. Model No. Description
80L42 FDVS Bag of Volcanic Stone
Junction Box / Receptical Kit
Cat. No. Model No. Description
H1958 JBK
Junction Box / Electrical Kit
(ref. Form #750,203M)
Decorative Screen Door Panel Kit
Cat. No. Model Where Used
H1959 ASD3624-TI UVF-36
H1960 ASD3628-TI UVFRC-3628 & UVFRC-3628-H
H1961 ASD4228-TI UVFRC-4228 & UVFRC-4228-H
Decorative Arch Screen Panel Kit
This attractive screen door is easy to install and
enhances the appearance of the appliance.
(ref. Form # 750,209M)