Filter
Top Products
13
A.0500.551 – IM-TGMAG/02.00 EN (02/2008)
TG MAG 58-80 G2 S 0C BG 2 Q S5 S10 V R
1 2 3 4 5 6 7 8 9 10 11 12 13
7. Idler bush and idler materials
SG Idler bush in hardened steel with idler in cast iron
CG Idler bush in carbon with idler in cast iron
BG Idler bush in bronze with idler in cast iron
HG Idler bush in ceramic with idler in cast iron
SS Idler bush in hardened steel with idler in steel
CS Idler bush in carbon with idler in steel
BS Idler bush in bronze with idler in steel
HS Idler bush in ceramic with idler in steel
US Idler bush in hardmetal with idler in steel
BR Idler bush in bronze with idler in stainless steel
CR Idler bush in carbon with idler in stainless steel
UR Idler bush in hardmetal with idler in stainless steel
HR Idler bush in ceramic with idler in stainless steel
8. Idler pin materials
2 Idler pin in hardened steel
5 Idler pin in nitrided stainless steel
6 Idler pin in hard coated stainless steel
9. Bushes on shaft materials
C Bushes in carbon
Q Bushes in silicon carbide
10. Rotor and shaft materials
S5 Rotor and shaft in nitrided carbon steel
R5 Rotor and shaft in nitrided stainless steel
11. Permanent magnet material and length of magnets (in cm)
S04 Samarium Cobalt magnets length = 40 mm
S06 Samarium Cobalt magnets length = 60 mm
S08 Samarium Cobalt magnets length = 80 mm
S10 Samarium Cobalt magnets length = 100 mm
S12 Samarium Cobalt magnets length = 120 mm
N04 Neodymium Iron Boron magnets, length = 40 mm
N06 Neodymium Iron Boron magnets, length = 60 mm
N08 Neodymium Iron Boron magnets, length = 80 mm
N10 Neodymium Iron Boron magnets, length = 100 mm
N12 Neodymium Iron Boron magnets, length = 120 mm
12. Elastomer material
V FPM (Fluorcarbon)
X Elastomer on request
13. Sense of rotation
R Clockwise seen from the shaft end of the pump
L Counter-clockwise seen from the shaft end of the pump