Filter
Top Products
ASSEMBLY REQUIREMENTS
EXHAUST DUCT
When you use the unit as an air conditioner, the hot exhaust air and evaporated condensate water must be vented out
of the room. The exhaust duct and venting kit serves this purpose.
NOTE: The exhaust duct and venting kit should not be used while the unit is operated in dehumidification,
or fan mode. DO NOT INSTALL EXHAUST DUCT WHILE UNIT IS IN OPERATION.
a) Slide “Unit Terminal End” of the exhaust
connector completely over the “Hot Air
Outlet Grill” on the rear of the unit.
Plastic grooves are located on the hot air
outlet help to guide the exhaust connector
into place.
i. Window Kit Mounting: The exhaust
hose easily connects to the window kit
by snapping the hose adapter directly
onto the kit. See page 7 for
window/sliding door kit installation.
ii. Wall Mounting: Mount the external
end of the exhaust duct to a 5¼” hole
within the wall. Creating a hole into a
wall is a separate procedure that may
require professional installation.
NOTE: Correct Mounting is shown to the
right, The center height of the hole should
between 16”-50”
8