Filter
Top Products
16
CASE
1. Avoid direct exposure to sunlight as case color may fade.
2. Clean surface area with a damp cloth. Dry with a soft towel.
3. Vacuum grill inlets with a soft brush attachment.
NOTE: Do not use abrasive cleaning products on the case.
STORING THE UNIT FOR AN EXTENDED PERIOD OF TIME OR TRANSPORTING
1. Unplug the unit from the power outlet.
2. Ensure that the water bucket is empty.
3. If using continuous drainage, disconnect any external drain hose and cap the end of the internal drain tube.
4. Store and transport unit in an upright position in a cool dry place.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REMEDY
Unit is unplugged
Securely plug receptacle into the
power outlet
Air exhaust is clogged
Remove obstruction from exhaust
hose
Unit does not operate
Timer is on Cancel the timer
There is a heating source in the
room
Turn other heating source off or
down
Temperature setting is too high Decrease temperature setting
Air filter is dirty Clean or replace the air filter
Air exhaust is not installed
correctly
Check the exhaust duct to make
sure that the hot exhaust air is
being vented out of the room
Room is too big or too much
ambient sunlight is reaching in
This unit provides spot cooling or
cooling for a room no larger than
450 square feet with standard
ceiling height
Unit does not cool room
There is frost on the evaporator
The unit will defrost
automatically and return to
operation afterwards
In dehumidifying mode, no cool
air coming out
There is frost on the evaporator
The unit will defrost
automatically and will return to
operation afterwards
Noise or vibration Surface is not level
Place unit on a level surface and
away from obstructions
Water is leaking from unit Surface is not level Place unit on a level surface