Filter
Top Products
NOTE: In order to achieve maximum room cooling efficiency, the exhaust duct should
remain as short and straight as possible. To further shorten the exhaust hose, first unthread
either exhaust duct adapter clockwise to remove it. Then cut the hose to desired length. It
is not recommended to increase the manufacturer’s length of the exhaust hose. This may
reduce the cooling efficiency or damage the unit.
7
2) Window Kit Installation
a. Open window approximately
5 inches (13 cm)
b. Adjust the length of the window kit
to the same length of the window; use both
panels if necessary. The window kit
has a maximum length 50.5 inches.
c. Place the window kit between the window
and the window frame as shown in the
picture to the right. Close the window onto
the window kit to form a tight seal.
d. Attach the exhaust duct window kit adapter
to the window kit. Tabs located on the
adapter will lock into place securing the
adapter to the window kit.
NOTE: Using the window kit will cause the window not to be properly closed and locked.
Additional security measurements should be taken.
CONTROL PANEL AND LCD DISPLAY
CONTROL PANEL
LCD DISPLAY