Filter
Top Products
ASSEMBLY REQUIREMENTS
1)
Exhaust Duct
When you use the unit as an air conditioner, the hot exhaust air must be directed out of the
room. The exhaust duct is required to allow the hot air out of the room through a window.
DO NOT INSTALL OR USE THE EXHAUST DUCT WHEN THE UNIT IS
OPERATED AS A DEHUMIDIFIER OR FAN.
Slide “Unit Terminal End” of the exhaust
connector completely over the “Hot Air Outlet
Grill” on the rear of the unit. Plastic grooves
are located on the hot air outlet help to guide
the exhaust connector into place.
Window Kit Mounting: Connect the window
kit adapter to the external end of the exhaust
duct. The exhaust duct is now ready to be
attached to the window kit. See page 7 for
window kit installation
Wall Mounting: Mount the external end of the
exhaust duct to a 5¼” hole within the wall.
Creating a hole into a wall is a separate
procedure that may require professional
installation.
6