Filter
Top Products
6
4. Press FAN button, set fan
speed.
3. Press SWING button, the
louvers start to rotate au-
tomatically, and stop when
repressed.
5. Press TEMP. button, set
suitable SET TEMP.
2. Press MODE button, set
operation mode.
1. Plug in, press 1/0 button, then
air conditioner is turned on.
COOL mode operation procedure
1/0
According to difference between room temp. and set temp., microcomputer can control cool-
ing on or not.
If room temp. is higher than set temp. , compressor runs at COOL mode.
If room temp. is lower than set temp., compressor stops and only indoor fan motor runs.
SET TEMP. should be in range of 16
o
C to 30
o
C.
66162002 6 02 11 30 10 246