Sinclair ASH-24CN Air Conditioner User Manual


 
-- 23 --
23
Indoor unit
1. The inlet and outlet should not be covered so that the outflow air can reach all parts of the room.
2. Install in a location where is easy to connect to the outdoor unit.
3. A location from which the condensation water can be drained out conveniently.
4. Avoid a location where there is heat source, high humidity or inflammable gas.
5. Install in a location where is strong enough to withstand the full weight and vibration of the unit.
6. Be sure that the installation conforms to the installation dimension diagram.
7. Be sure to leave enough space to allow access for routine maintenance. The height of the installed location
should be 2.3m or more from the floor.
8. Install in a location where is 1m or more away from other electric appliances such as television, audio
device, etc.
9. Select location where is easy to remove and clean the filter.
10. Do not use the unit in the immediate surroundings of a laundry, a bath, a shower or a swimming pool.
Outdoor unit
1. Select location from which noise and outflow air emitted by unit will not disturb neighbors.
2. Select location where ventilate freety.
3. The inlet and outlet should not be covered.
4. The location should be able to withstand the full weight and vibration of the outdoor unit.
5. There should be no danger of flammable gas or corrosive gas leaks.
6. Be sure that the installation conforms to the installation dimension diagram.
NOTE:
Install in the following place may cause mal-function. If it is unavoidable, contact with Service center
please.
Place where oil (machine oil) is used.
The place where a lot of salinities such as coast exists.
Place where a sulfured gas such as the hot spring zones is generated.
Place where high-frequency waves are generated by radio equipment, welders and medical equipment.
Other place with special circumstance.
Installation location
66162002 6 02 11 30 102523