Filter
Top Products
G8860 _4 Installation Manual NZ
19
22.1 IB1100- Locating the Log Set After Replacing the Fire Box:
1) Remove packaging from around log sets
2) Place 2 x rear logs (long rectangular ones) into position by inserting in behind retainer
brackets at rear of fire box.
3) Place front three log sets into position over the top of the main burners. Use the log
template to properly locate the logs. The front edge of each log should be located so that
its front edge is directly behind the holes in the top of each burner which should follow
the contours of the logs.
4) Cover empty spaces around logs with small logs as per 4) & 5) on previous page