Filter
Top Products
14
■ APMS (Automatic Programmable
Music Selector)
1 Select the desired programme source, CD or
MD, by pressing the CD or MD button.
2 Press the MEMORY button.
MEMORY
MEMORY
REC
3 Press the 5 3 or 2 4 button.
MEMORY
REC
Selected track number
4 Press the ENTER button.
MEMORY
Playback order
5 Repeat steps 3 and 4 for any other tracks up to
20 tracks (P-20) can be programmed.
6 Press the ■ button.
MEMORY
Total playing time
MEMORY
● The total playing time of the programmed tracks
will be automatically displayed.
7 Press the 0 6 button to start playback of the
programmed selections.
● After all of the programmed tracks have finished
playback, the unit will automatically stop.
(Continued)
3
CLEAR
1
2
6
7
4
(Remote control operation)
To clear the programmed selections:
Press the CLEAR button whilst the “MEMORY”
indicator is flashing.
● Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the APMS:
Whilst the unit is stopped in the APMS mode, press
the CLEAR button to turn off the “MEMORY” dis-
play.
● The programme contents will be erased.
● When you open the CD compartment or a
MiniDisc is ejected, the APMS mode will be can-
celled.
To check which tracks are programmed:
Whilst the unit is stopped in the APMS mode, press
the 5 3 or 2 4 button.
Adding tracks to the programme
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Then
follow steps 2 - 6 to add additional tracks, the newly
selected tracks will be stored after the last track of
the original programme.
Notes:
● It is not possible to insert an additional track
between programmed tracks that have already
been entered.
● Programming and cancelling are not possible
during playback or in the pause mode.