Sharp AE-Z48LZ Heat Pump User Manual


 
6
1
Press the COOL, DRY or HEAT button .
: HEAT
: COOL
: DRY
• The red OPERATION lamp ( ) on the unit
will light.
2
To change the temperature setting,
press the THERMOSTAT button.
HEAT/COOL MODE
• The temperature can be set within the
range of 18°C to 32°C.
DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the unit.
3
To change the fan speed, press the FAN
button.
AUTO SOFT LOW HIGH
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
4
To turn off the unit, press the STOP
button.
• The red OPERATION lamp ( ) on the
unit will turn off.
BASIC OPERATION
(Example: 1°C higher)
(Example: 2°C lower)
1
4
2
3