Sharp AE-Z48LZ Heat Pump User Manual


 
8
SPOT AIR
The louvres are adjusted so that air ow is
delivered to the desired area.
1
Press the SPOT AIR button to select
the desired air ow direction.
NOTE:
• If you want the SPOT AIR setting in the FULL
POWER mode, press the SPOT AIR button
during the FULL POWER operation.
• The COANDA AIRFLOW setting and the SPOT
AIR setting can not be used together.
In cool or dry mode, the vertical air ow louvre
is set obliquely upward to deliver cool air to the
ceiling in order to avoid direct air ow.
In heat mode, the vertical air ow louvre is set
downward to deliver warm air down to the oor.
1
During operation, press the COANDA
AIRFLOW button.
(HEAT mode)
• The remote control will display “ ”.
(COOL / DRY mode)
• The remote control will display “ ”.
TO CANCEL
Press the COANDA AIRFLOW button again.
NOTE:
• If you want the COANDA AIRFLOW setting in
the FULL POWER mode, press the COANDA
AIRFLOW button during the FULL POWER
operation.
• The COANDA AIRFLOW setting and the SPOT
AIR setting can not be used together.
COANDA AIRFLOW
1
1
CANCEL