Sharp AE-Z48LZ Heat Pump User Manual


 
14
MAINTENANCE AFTER HEAT PUMP
SEASON
1
Operate the unit in the SELF CLEAN
operation to allow the mechanism to
thoroughly dry.
2
Stop the operation and turn off the
circuit breaker.
3
Clean the lters, then reinstall them.
MAINTENANCE BEFORE HEAT PUMP
SEASON
1
Make sure that the air lters are not
dirty.
2
Make sure that nothing obstructs the
air inlet or outlet.
CHANGING THE AIR PURIFYING FILTER
The air purifying lters should be changed every 3
~ 6 months
1
Remove the air lters.
2
Change the air purifying lters.
1
Take off the old air purifying lters from the
air lters.
2
Set the new air purifying lters, under the
lter stoppers located on the air lters.
3
Reinstall the air lters.
NOTE:
• The dirty air purifying lters are not washable
for reuse. The new lters are available at your
nearest dealer.
Disposal of Filters
Please dispose of replaced lters according to the
local disposal laws and regulations.
AIR PURIFYING lter materials
Filter:Polypropylene
Frame:Polyester
MAINTENANCE
Be sure to stop the operation and turn off the
circuit breaker before performing any mainte-
nance.
CLEANING THE FILTERS
The air lters should be cleaned every two weeks.
1
Turn off the unit.
2
Remove the lters.
1
Lift the open panel.
2
Push the air filters up slightly to unlock
them.
3
Pull the air lters down to remove them.
3
Take off the air purifying lters from the
air lters.
4
Clean the lters.
Use a vacuum cleaner to remove dust. If the
lters are dirty, wash them with warm water and
a mild detergent. Dry lters in the shade before
reinstalling.
5
Reinstall the air purifying lters.
6
Reinstall the lters.
1
Reinstall the lters in the original positions.
2
Close the open panel.
CLEANING THE UNIT AND THE REMOTE
CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It
can cause electrical shock or equipment damage.
• Do not use hot water, thinner, abrasive powders
or strong solvents.
Filter stopper
2
1
1
3
2
Air lter
Air purifying lter