Sharp AE-Z48LZ Heat Pump User Manual


 
12
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room will
reduce some airborne mold and viruses.
1
During operation, press the
PLASMACLUSTER button.
The remote control will display “ ”.
The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time
you turn on the unit.
• To turn off the PLASMACLUSTER lamp, press
the DISPLAY button.
• To perform Plasmacluster operation in FAN only
mode, press the PLASMACLUSTER button when
the unit is not operating.
The mode symbol of the remote control will go off
and the fan speed cannot be set to AUTO.
SELF CLEAN OPERATION
SELF CLEAN operation using Plasmacluster
ions helps to reduce the growth mold fungus
and dry inside of the unit. It is recommended to
utilize the operation at seasonal change over.
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control displays “ ”.
• The blue PLASMACLUSTER lamp on the unit
will light up.
The unit will stop operation after 40 minutes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp on the unit will
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already in existence can not be
eliminated by this operation.
1
1