Filter
Top Products
Disconnect the machine from the power supply before cleaning.
J
Open the looper cover,
Remove the waste materials with a lint brush,
Needle pla
$8_ SCreW
(_ Open the looper and side covers,
(_) Remove the needles and presser foot.
Remove the needle ptate set screw and needle
plate.
®®
(_ Push the lint around the feed dog to the front
by using iint brush.
_) Replace needle plate, presser foot and needles.
Close the looper and side covers,
* You may use vacuum cleaner to clean the upper knife area or teed dog.
37