Filter
Top Products
e Threading the Lower Looper
®
Open the looper and side covers.
Loosen screw and remove presser foot assembly.
Place the spool of thread on the right side spool pin.
i * Points to thread for lower looper are marked
10 [ in green.
Thread guide
\
(9
_ ....................... J
(_) Draw the thread through
the right side thread guide
from back to front.
How to Thread the Lower Looper
1
Thread guide
plate
Looper thread gutde
4
® ®
(_ Pass the thread through (_) Pass the thread through the
holes on the right side of right side of thread guide
thread guide plate as iliu- sliding the thread from left
strated, to right.
Cut the both needle threads as shown in the figure and remove
them from the needles.
Thread the lower looper and then re-thread the needles.