Filter
Top Products
® ®
Regular Rolled her'nm_ng
(ior normal (for rolled hemming
Sewing} p_cot edging and
narrow hemming)
Stamp on the reverse "S .... R"
stde ol the plate
" Select the needle plate for your sewing need.
* Your overlock is shipped with the regular needle plate in place,
For your Safety:
When you change the needle plate or adjust the seam width, make sure that the machine is discon*
nected from the power supply.
30
=: ::[:: ,::::{:: ': :::: :::::'::}: : ::::::,:::::"
Tighten
NeedIe
Be[ Screw
(_) Turn the hand wheel toward you until the
needle comes above the needle plate. Then
remove the presser foot.
(_ Open the side and looper covers.
(Refer to page 6.)
® Set the upper knife to down posrtion.
(Refer to page 29.)
@ Remove the needle plate set screw, and lift
the needle plate.
@ Attach the needle plate you require with the
needle plate set screw,
(_) Bring the upper knife to up position.
(Refer to page 29.)
(_ Close the looper and side covers,
(_) Attach the presser foot.