Filter
Top Products
1. Unplug the machine and remove
the presser foot and needle.
2. Remove the bobbin cover plate.
3. Remove the screw on the left side
of the needle with the large screw
driver.
4. Remove the needle plate.
J
6. Use the lint brush to clean the
feed dogs, hook race and bobbin
holder. Also use a soft, dry cloth.
5. Take out the bobbin. Lift up the
bobbin holder and remove it.
7° Line up the triangle marks and
position the bobbin holder so the
notch fits next to the stopper in
the hook race.
Open face cover plate and oil two points as shown below at least once a year. One
or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
In case machine is not used for an
extended time, oil it before sewing.
Use good quality sewing machine oil:
No other oiling is required
Above points are only area which
require oiling on this machine.
65